Description
Purpose:
Steel pin to connect two center connectors.
Material:
Steel
Storage:
All CERA products have to be stored in original packaging, kept dry and protected from UV radiation. Storage temperature must not be less than +10° C.
Storage life/durability:
CERA products have no expiration date, if properly stored.
Handling:
To form the crossbar, you need two center connectors and one steel pin. This fits for all 18, 26 and 45 sizes of center connectors. At first the steel pin should be put into the first center connector, then the open end of the pin should be pushed into 3.5 mm drill hole of the drilled bar. Then the second connector should be put over the steel pin till the steel pin is centered between the connectors.
Processing instructions:
The steel pins stated below are only to be used with CERA center connectors. After assembly, thermal endurance up to +110° C is possible, but only if no additional load occurs.
Specifications
| Profile type | Aluminium |
|---|---|
| System Solutions | Steel pin |
| System properties | mill-finished |
| Color | silver |
| SZR | 12131415161820 |







